Material Safety Data Sheet
MATERIAL SAFETY DATA SHEET
PRODUCT NAME: SUPER SOFT CLEAR WORM COMPOUND
PRODUCT CODE: 1800 SUPER SOFT
DATE PRINTED: 26/03/2012
No reportable quantities of hazardous ingredients are present
No toxic chemical (s) subject to the reporting requirements of Section 313 of Title 111 and of 40 CFR 372 are present
SECTION 111 - PHYSICAL/CHEMICAL CHARACTERISTICS
BOILING RANGE: n/a
SPECIFIC GRAVITY (H20=1): .98
VAPOR DENSITY: Unknown
EVAPORATION RATE: Unknown
COATING V.O.C.: 0.0 lb/gl
MATERIAL V.O.C.: 0.0 lb/gl
SOLUBILITY IN WATER: Nil
APPEARANCE & ODOR: Plastisol Liquid with sweetish odor
SECTION 1V - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: n/a
FLAMMABLE LIMITS IN
AIR BY VOLUME Lower: n/a Upper: n/a
EXTINGUISHING MEDIA: Foam, CO2, Dry Chemical and Water
Fog
SPECIAL FIREFIGHTING PROCEDURES:
Fire Fighters should utilize a SCBA in positive-pressure mode. In enclosed or poorly ventilated areas, wear an SCBA during clean up fighting operations
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Hydrogen chloride is generated upon combustion of this material. When dissolved in water, hydrogen chloride becomes an acid and can have a corrosive effect upon many metals. Since this corrosion can be a slow process which will take place long after initial exposure, prompt cleaning of surfaces with water-based detergents is indicated
SECTION V - REACTIVITY DATA
STABILITY: Stable
CONDITIONS TO AVOID: Extreme Heat
INCOMPATIBILITY
(MATERIALS TO AVOID) Water
HAZARDOUS DECOMPOSITION OR BYPRODUCTS
Carbon Dioxide, carbon monoxide, hydrogen chloride and others possible
HAZARDOUS POLYMERIZATION: Will not occur
SECTION V1 - HEALTH HAZARD DATA
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Prolonged breathing of fumes from fusing operation may cause lung irritation
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Liquid may cause eye irritation and dermatitis
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Skin irritation
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Prolonged breathing of fumes from fusing operation may cause lung irritation
HEALTH HAZARDS (ACUTE AND CHRONIC)
Liquid may cause eye irritation and dermatitis. Prolonged breathing of fumes from fusing operation may cause lung irritation
CARCINOGENICITY
NTP CARCINOGEN: No
IARC MONOGRAPHS: No
OSHA REGULATED: No
MEDICAL CONDITIONS GENERALLY AGGERAVATED BY EXPOSURE
Skin disorders, eye and lung disorders possible
EMERGENCY AND FIRST AID PROCEDURES
Eye Flush with water.
Skin Wash with soap and water
Inhalation Remove to fresh air
Ingestion Induce vomiting
Seek medical attention
SECTION V11 - PRECAUTIONS FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Dam up to limit spreading. Scrape up or absorb with inert material Do not flush down sewer
WASTE DISPOSAL METHOD
Incinerate or landfill in accordance with Federal, State and Local Laws and Regulations
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
Avoid excessive heat
Avoid Eye contact
Avoid prolonged or repeated skin contact
OTHER PRECAUTIONS
Do not dump in sewer
SECTION V111 - CONTROL MEASURES
RESPIRATORY PROTECTION
None under normal conditions
Self contained breathing apparatus under extreme conditions
VENTILATION
During fusion to prevent employee exposure to vapours
PROTECTIVE GLOVES
Impermeable
OTHER PROTECTIVE CLOTHING OR EQUIPMENT
Not applicable
WORK/HYGIENIC PRACTICES
Normal cleanliness should be observed
/HYGIENIC PRACTICES
Normal cleanliness should be observed